vmware enhanced keyboard driver reboot host to enable

VMWARE ENHANCED KEYBOARD DRIVER REBOOT HOST TO ENABLE SOFTWARE
VMWARE ENHANCED KEYBOARD DRIVER REBOOT HOST TO ENABLE WINDOWS

EFI Network : boot on the network in EFI mode.

If there is an EFI compatible CD/DVD in this virtual CD/DVD drive.

EFI VMware Virtual SATA CDROM Drive (1.0) : boot to the virtual SCSI CD/DVD drive.

EFI VMware Virtual SCSI Hard Drive (0.0) : boot to the virtual SCSI hard drive connect to position 0.0 of the virtual SCSI controller.

VMWARE ENHANCED KEYBOARD DRIVER REBOOT HOST TO ENABLE WINDOWS

Windows Boot Manager : boot on the Windows installed in the virtual machine.

Here, you have the option of booting directly on the desired device by selecting it with the arrows, then pressing Enter. Instead of arriving on a very simple PhoenixBIOS, you arrive on an EFI Boot Manager. If you have created a virtual machine with EFI firmware (for example with Win 8, 8.1 or 10 as guest OS) to take advantage of secure boot, for example, you will see that changing the boot order is a little more complicated.īoot your virtual machine on its EFI firmware by clicking on : Power On to Firmware. Change the boot order from the EFI firmware Change the boot order in UEFI mode (EFI firmware) 2.1. Then, press F10 to save the changes and confirm by pressing Enter.Ģ. The one at the top is the priority for others. To change the order of a device, select it with the arrows on the keyboard, then use the '+' and '-' keys to move the selected option up or down.

the network boot (PXE) appears as 'Network boot from Intel/AMD.

virtual hard disks appear as 'VMware Virtual.

the floppy drive appears as 'Legacy Floppy Drives' under 'Removable Devices' when there is a floppy drive in your virtual machine.

Go to the 'Boot' tab and change the order of the desired devices : If your virtual machine uses a BIOS and not the UEFI, changing the boot order is very easy.Ĭlick on : VM -> Power -> Power On to Firmware.

Change the boot order by modifying the vmx file.Change the boot order from the EFI firmware.Change the boot order in UEFI mode (EFI firmware).If you want to change the boot order from this EFI firmware or from the LEGACY BIOS of a virtual machine present on a VMware ESXi hypervisor, you can therefore also refer to the tutorial below. Note that the EFI firmware and the LEGACY BIOS used by VMware Workstation for virtual machines are identical on VMware ESXi. In addition, the EFI interface is not as easy to use, compared to the conventional BIOS.

Although I don't need this.When you want to change the boot order of a virtual machine with VMware Workstation, you have several possibilities. If I chose Shared reader option, is the reader going to be available on the host and guest simultaneously. And I see on the bottom bar that I can chose the Reader itself or Shared Reader device. I can only manually connect it to the VM guest. But I've observed that when I connect them to the host USB port there is no dialog box popping up to offer that I chose what to do next (connect it to host, guest ,etc).

VMWARE ENHANCED KEYBOARD DRIVER REBOOT HOST TO ENABLE SOFTWARE

And when I start the guest VM without the USB dongle connected to it (guest) the software cannot run because the protection component (dongle) is missing.Īdditionally I have two other Card reader devices with Digital certificates that I use only in the VM guest and I want them to connect automatically too. I need the old behaviour back, because I have a USB dongle (that is a HID type and doesn't need additional drivers) that is always connected to the Physical Host machine and protects a software that I run only in guest VM environment. 0 = 'path:1/3/0/1 autoclean:1' obviously for the reason you pointed out.

Setting a record in the config file doesn't do it (connect automatically) either.

Connect the device to the foreground virtual machine - when set this option doesn't disconnect the USB device from the host and connect it to guest VM automatically.

Select one of the options and click OK.

Actually I've tried all options from the settings.

Vmware enhanced keyboard driver reboot host to enable